Individual House for sale in Bangalore | Apartments for rent in Bangalore | Plots for sale in Bangalore | House for rent in Bangalore
Water is one of the
greatest enemies of buildings, and if adequate precautions are not taken it can
seriously degrade your precious asset.
Most problems
arising out of rain can be tackled with a little forethought and by following
precautionary measures.
The world of nature
always welcomes rains. The rain rejuvenates flora and fauna. Rain washes clean
the environs and external building surfaces. But it's a different story inside.
The rains could add to your woes here, causing numerous problems. But these are
all solvable, and it is easy to tackle them with proper precautions and
corrective measures.
Usual Problems
Rains raise
atmospheric humidity. Inadequate sunlight and ventilation affects enclosed
areas in buildings. Eventually dampness creeps in, and it is injurious to the
people who might already be suffering from respiratory problems.
Dampness leads to
the proliferation of algae, discolouring painted walls and resulting in peeling
and flaking. Continuous darkness can affect artifacts like oil paintings.
Another common problem is the seepage of rain water. Water percolates through
minute surface cracks on the roof and creates soggy patches on ceilings and
walls. It could even enter hairline cracks in the flooring causing tiles to
become uneven.
Water proofing
While constructing
a house, water proofing of terraces and toilets is extremely important. Windows
and doors facing the exterior must have an overhang or chajja to prevent
rainwater from entering the interiors. Water proofing compounds mixed into the
plaster give an added layer of protection against water.
The exposed brick,
though aesthetically attractive, can become an absorptive surface, in the
absence of plastering. Varnishing or painting the brick surface will give
partial protection.
Water seepage also
occurs through the ground. It is advisable to raise the plinth above ground
level, and have flagging concrete or plinth protection along the base of the
walls on the exterior.
Interior problems
In bathrooms the
dampness caused by steam creates a film on all the surfaces there. A black
mould forms on shower curtains and walls, causing the warping of storage
cabinets and the plywood backings of mirrors.
In kitchens due to
the regular washing of cooking vessels, the splash area above the sink as well
as the surrounding floors gets constantly splattered with droplets of soapy
water, and this can make the floor a potentially dangerous slippery area.
The wardrobes and
carpeting are difficult to maintain areas inside bedrooms. If a damp wall has a
wooden wardrobe attached to it, water enters the woodwork and causes it to
warp. The subsequent expansion and shrinkage makes the closing of shutters
difficult since the alignment is lost. The wet carpets in closed rooms without
air movement emit an odour which is very difficult to eradicate.
During rainy days
it's the utility areas which are used the most. Semi dry or dripping wet
clothes which hang from clothesline or stands, wet umbrellas, rain coats and
wet shoes are usually placed here to avoid messing up the rest of the house.
Tips
Some sensible and
easy to follow precautions if taken in time can solve most of the above
problems.
-Water proofing
treatment should be done without fail during construction.
-All rooms should
have adequate cross ventilation. This facilitates air movement, and prevents
odours.
-Sunlight should be
allowed to enter areas that are prone to dampness.
-Areas with
dripping water should be periodically mopped to avoid stains on the floor.
-Walls that have
constant contact with water should have cladding with glazed tiles or enamel
paint. These surfaces then can be wiped dry. Shower curtains have to be wiped
dry after a shower since mouldy patches left on the plastic are difficult to
clean.
-In rooms where
natural ventilation is not possible, air purifiers/ humidifiers, air
conditioners, fans and exhaust fans can help maintain optimum humidity.
-The woodwork used
for cabinets in wet areas should be raised above floor level if there is water.
They should be coated with a melamine layer or should be fabricated from water
proof plywood with laminated surfaces.
-The interiors of
wardrobes which are dark and damp, are often prone to silverfish and mould.
These cause patches on internal walls, wood work and clothes. The use of
naphthalene and silica gel desiccant packets helps to alleviate these problems.
-Absorbent floor
mats can be used to absorb water from rainy footwear, and avoid muddy patches
on clean tiles and carpets.
No comments:
Post a Comment